Stop Fighting With Your Sidel Heating Lamps
Let’s be honest: swapping out heating lamps in a PET blowing line is usually a pain. You’re either fighting with a footprint that doesn’t quite line up or spending way too much time messing around with wiring that doesn’t want to cooperate. We got tired of that. So, we built an infrared lamp series that actually fits. Whether you’re running an old-school SBO or a newer Matrix system, these just slide right in. It’s all about the millimeters When Sidel moved from SBO to Matrix, they changed the oven geometry and how the power is handled. Most “universal” lamps ignore that. We didn’t. We mirrored the exact length and connector specs of the original parts. Why? Because if a lamp is off by even two millimeters, you’re looking at uneven heat or, worse, a quartz tube that’s under too much mechanical stress. We build them to be precise so you don’t have to spend your afternoon modifying oven racks. Heat that actually works These lamps are designed to hit high-wattage densities. The goal is simple: get that preform to the right temperature fast, without scorching the surface. We use halogen-filled quartz to keep the heat steady, even when you’re running the line for hours on end. But here’s a tip: if you’re cranking up the wattage to push your line speed, keep an eye on your cooling blowers. If your cooling system is old or clogged with dust, those high-output lamps can make your surrounding electronics run way too hot. Just something to watch out for. No splicing, no stress The best part? The connectors. They snap right into your existing wiring. No splicing. No rewiring. No “making it work.” You just pull the old tube out, slide ours in, and plug it up. It makes maintenance windows a lot shorter and a lot less stressful. Plus, we’ve tested these across the whole Sidel range. We made sure the electrical load matches your power supply, so you don’t have to worry about frying your controllers.